easy way is the first completely wireless CAREL solution for the management of ambient comfort (temperature and humidity) in buildings.

It guarantees energy saving and optimisation of the entire system.

Ideal for air-source systems (roof-top units, air handling units), they can be adapted to any type of application (underfloor heating, industrial monitoring,…).

The system is made up of:
• easy set: an innovative wireless terminal with built in temperature and humidity sensors.
• easy read: wireless temperature and humidity sensors.
• access point: RS485 to ZigBee™ gateway, used to gather the information from the terminals and sensors and send it to a master supervisor (pCO controller, PlantVisorPRO or PlantWatchPRO).
• repeater: ZigBee™ to ZigBee™ device that repeats the radio signals so as to allow greater distance between the access point and the terminals/sensors.

easy way is an advantageous solution in terms of:
• flexibility: possibility to manage flexible spaces very simply, i.e. the reorganisation of a supermarket or office, without having an impact on the communication network;
• simple retrofit installation in historic or prestige buildings that do not have raised floors or false ceilings;
• lower installation and running costs;
• simple commissioning/service;
• integration with the more commonly-used Building Management Systems (BMS);
• specific control of individual zones (energy saving);
• the now mature ZigBee™ standard technology used for wireless communication ensures a high degree of security in the exchange of data;
• Mesh layout between access point and repeater

The EasySet terminal is used to communicate CAREL supervisor systems. Specifically, the EasySet terminal measures the ambient temperature also be used to set a number of parameters, such as the temperature and humidity set point, the them to the Access Point.	The EasyRead sensor is used to communicate with the Access Point and send the temperature and humidity readings, depending on the model chosen, to CAREL supervisor systems.
The Access Point ensures communication between devices with the CAREL protocol (pCO sistema, PlantVisor) and wireless terminals (EW**T*), sensors (EW**S*) or other repeaters (EW**R*).	The Repeater is used to communicate with the terminals and sensors or other repeaters, and forward the data to the Access Point that too far away to receive the signal. The Repeater thus relays the signal between the devices located the controlled area and the Access Point, when the distance is too far for correct reception.