| Models |
humiDisk65 |
humiDisk10 |
| Steam production (lb/hr) |
1.9 lbs/hr up to 14.3 lbs/hr |
2.2 lbs/h at 2330V/50hz; 2.6 lbs/hr at 110v/60hz |
| Power supply |
230V, 50Hz - 11V, 60HZ |
230V, 50HZ - 110 V, 60Hz |
| Air flow |
165 cfm |
47 cfm |
| Water inlet pressure |
14.5 to 145 psi |
|
| Water tank |
0.012 lbs |
0.12 lbs |
| Index of protection |
IPX4 |
IPX4 |
| Ambient condition limits (without anit-freeze heater) |
34 to 95 °F, 0 to 100% RH non-condensing |
| Ambient condition limits (wth anti-freeze heater) |
28 to 95 °F, 0 to 100% RH non- condensing |
| Water temperature limit |
34 to 122 °F |
| Water total hardness limits* |
30 °fH, 300 ppm CaCO3 |
| Water conductivity limits |
100 to 1200 µS/cm |
*not lower than 200% of CI- in mg/l
The quantity and quality of the minerals dissolved in the water affects the frequency of the routine maintenance operations and the amount of dust generated. For best operation, use demineralized water (not softened, as this does not reduce the content of mineral dissolved in the water).At any rate, it is suggested to follow the specifications of the UNI 8884 standard, "Characteristics and treatment of the water in cooling and humidification circuits", conductivity <100 µS/cm; total hardness <5 °fH (50ppm CaCO3). |
