Integration

HumiVisor is a new remote humidifier supervisor/controller designed to integrate any Carel humidifier using the new HumiControl. This includes the UR 2000 series at this point. In the future, HumiVisor will also connect to the gaSteam, humiSteam, and heaterSteam humidifiers.

The HumiVisor gives the customer a single point from which to monitor and control any Carel humidifier anywhere in the building.

Back-lit comprehensive display

In the example in Fig. A, the display shows that there are 3 humidifiers connected (1) and that the parameters displayed are relative to unit 2, which is in the programming phase (2).  The set value (4) is 60.0%rH (3).  The humidifier is in the steam production phase (5) and, at the same time, is filling with water (6). 

In the example in Fig. B, there are 4 humidifiers connected and the display shows the status of unit 3 (7).  The unit is in an alarm condition (9) due to low humidity (10) and excessive foam (11).

Humivisor allows you to create a local network of up to 4 humidifiers.  The two-wire RS485 serial network may be up to 3000 feet.

Technical characteristics

• wall mounting
• setting of the number of humidifiers connected
• setting of the parameters/function of the terminal
• setting of the current time and day
• setting of weekly ON/OFF times with up to two cycles per day
• display of the current time and day and the ON/OFF status of the output timer
• global display of the ON/OFF and the alarm status of all the humidifiers connected
• detailed display of the status of one humidifier
• setting of the main parameters and enabling/disabling of the humidifier
• display and setting of all the humidifier parameters, with password access