| IR Series | universal thermostat, humidistat and pressure switch | |||||
 |
Fan 0 to 10 V control module CONV0/10A0 (infrared Universal) Product relation: infrared Universal This module converts the PWM signal sent by the corresponding relay on the controller to a standard 0 to 10 V (or 4 to 20 mA) signal. Documentation
|
| SSR 0 to 1 V control module CONV0/1L00 Product relation: IR*A* - IR32D* Special modules have been developed to connect directly to the Universal infrared series instruments (version D and A) for the control of solid state relay. CONV0/1L00 module powers other transducers and converts a 0 to 10 V signal into a 0 to 1 V signal as the CAREL standard.
Documentation
|
||||||||||||||||||||||||||||||||||
 |
Fan ON/OFF control module CONVONOFF0 Product relation: IR*A* - IR32D* This module uses a relay to manage the condenser fans in ON/OFF mode. The relay has contacts rated to 10A at 250 Vac in AC1 (1/3 HP inductive). Documentation
|
 |
IR32 Universal serial cards IR*SER* (infrared Universal) Product relation: infrared Universal These are optional cards that allow the Infrared series controllers to be connected to supervisor networks; they can be fitted in the instruments, even when these are already installed. IR32*E* with a built-in serial card is available if supervision is required. To connect IRDR controllers to the supervisory network, use T connector (code TCONN60000).
Documentation
|
 |
Remote control IRTRU* Product relation: infrared Universal It is available with an optional infrared remote control to simplify the ir Universal controller's programming.
Documentation
|
||||||||||||||||||
 |
Transformers TRA0040000 Product relation: infrared Universal The transformers adapt the supply power mains to the voltage of ir Universal controllers. Their compact size and efficient design (the winding is immersed in resin) makes it useful in many applications. Documentation
|
||||||||||||||