The µC3 was designed for manufacturers who require increasingly high performace and competitive products. The controller can be installed with or without the DIN rail case, and the wiring system is plug-in with Molex® connectors. The case guarantees a high index of protection, reducing the risk of electrostatic discharge.
µC3 can manage up to six hermetic compressors or two semi-hermetic compressors in a maximum of 2 circuits, with the possibility to control the electronic expansion valve. With the large number of inputs and outputs, the µC3 can control the following:
- air/water units
- chillers and heat pumps
- water/water units with reversal of the gas and water circuit
- air and water-cooled condensing units with and without reverse cycle
- air/air heat pumps
Using the optional RS485 communication board, µC3 can be interfaced with the CAREL PlantVisor supervisory system. Using the embedded Modbus® RTU protocol or optional LonWorks™ ensures open connectivity to third-party BMS systems. The µC3 can receive and send SMS messages via a GSM modem using the optional RS232 board. There is a built-in tLAN port for the connection of the local LED terminal and an RS485 port for the electronic expansion valve driver. |
|
