Literature is not available |
Room terminal
ADP*
Product relation: µC3
pAD is an LCD with icons for remote wall-mounting in the room as a simple user interface and features a built-in temperature and humidity sensor and time band management, for use in residential or smaller commercial/services applications. |
|
| |
 |
Electronic expansion valve driver
EVD0000400
Product relation: µC3, µC2, µC2 SE
It controls the refrigerant superheating, managing many of the stepper electronic expansion valves now on the market and ratiometric pressure transducers, the bypass algorithms, the control alternative to superheating and the possibility of many configurations. |
Literature
| Part Number |
Description |
Type |
Language |
Date |
Release |
| +050003875 |
PID controller with driver for two pole stepper valve |
technical leaflet |
ALL |
11/6/2006 |
2.4 |
|
|
| |
 |
Programming key
MCH300KYA0
The programming key allows the instrument to be quickly programmed without being powered, avoiding any error. There are two versions, one with battery and one with external power supply. |
Literature
| Part Number |
Description |
Type |
Language |
Date |
Release |
| +050002930 |
MCH300KYA0 - programming key for µC3 |
technical leaflet |
ITA/ENG |
7/14/2005 |
1.0 |
|
|
| |
Literature is not available |
Fan speed controllers
MCHRTF*
Product relation: µC system
These devices modulate the power delivered to a generic load using the principle of phase cutting. These have been especially developed to receive the control signal from CAREL controllers (Pulse Width Modulation signal) in order to vary the speed of the condenser fan based on the pressure or temperature measured at the condenser coil; the models available can manage single-phase fans with currents of 2, 4, 6 and 8 A at 230 Vac.
|
| Part Number |
Description |
| MCHRTF20A0 |
fan speed controller, 2 A, 220 Vac, Molex® connectors |
| MCHRTF40A0 |
fan speed controller, 4 A, 220 Vac, Molex® connectors |
| MCHRTF60A0 |
fan speed controller, 6 A, 220 Vac, Molex® connectors |
| MCHRTF80A0 |
fan speed controller, 8 A, 220 Vac, Molex® connectors |
| MCHRTFC0A0 |
fan speed controller, 12 A, 220 Vac, Molex® connectors |
|
|
| |
Literature is not available |
LonWorks® serial card
PCO10000F0
Product relation: µC3
PCO10000F0 card is used to interface to a LonWorks® network. The type of interface on the LonWorks® network side is: PCO10000F0 - interface to FTT-10 A 78 kbs (TP/FT-10). The baud rate must be set to 4800. |
|
| |
 |
Clock card
PCO100CLK0
Product relation: µC3
It is an optional accessory that is used to manage the time and the date and includes buffer RAM for data relating to the software application. |
Documentation
| Part Number |
Description |
Type |
Language |
Date |
Release |
| +050003230 |
|
technical leaflet |
ITA/ENG |
1/30/2003 |
1.0 |
|
|
| |
 |
RS232 serial card
PCO100MDM0
Product relation: µC3
PCO100MDM0 card is used to interface directly to a standard HAYES modem. The following hardware signals can be managed: output, "request to send" (RTS) in parallel to "data terminal ready" (DTR); input, "carrier detect" (CD). The maximum baud rate is 19200 baud. |
Documentation
| Part Number |
Description |
Type |
Language |
Date |
Release |
| +050003240 |
|
technical leaflet |
ITA/ENG |
1/30/2002 |
1.0 |
|
|
| |
 |
RS485 serial card
PCOS004850
Product relation: µC3
Used to interface directly to an RS485 network with optical isolation. The maximum baud rate available is 19200 baud (settable via software). |
Documentation
| Part Number |
Description |
Type |
Language |
Date |
Release |
| +050003237 |
BMS serial card for pCO controller |
technical leaflet |
ITA/ENG |
2/14/2005 |
1.0 |
|
|
| |
 |
Smart key
PCOS00AKY0
Product relation: µC3
Used to download the logs saved in the µC3. |
Documentation
| Part Number |
Description |
Type |
Language |
Date |
Release |
| +050003420 |
PCOS00AKY0 - Smart Key |
technical leaflet |
ITA/ENG |
1/6/2006 |
1.2 |
|
|
| |
 |
Semigraphical user interface
PGD0*
Product relation: µC3
Advanced user interface that can display symbols, icons and the main international alphabets. The 120x32 pixel graphic display provides optimum management of the units, displaying the status of all the unit components: compressors, valves, pumps, etc. In addition, it also displays the various operating modes (chiller, heat pump). The keypad can be used to access and modify all the unit parameters in a simple and straightforward manner, making it an excellent service tool. |
| Part Number |
Description |
| PGD0000F00 |
Panel and flush mount version (single package), LCD, 120x32 pixels |
| PGD0000W00 |
Wall mount version (single package), LCD, 120x32 pixels |
| PGD0000F01 |
Panel and flush mount version, LCD, 120x32 pixels, without external frame, multiple package (20 pcs.) |
Documentation
| Part Number |
Description |
Type |
Language |
Date |
Release |
| +050001040 |
pGD0 |
technical leaflet |
ITA/ENG |
2/5/2004 |
1.3 |
|
|
| |
 |
pLD large terminal
pLD
Product relation: µC3
The competitive solution from CAREL for all those applications that require an affordable price and have limited space available for housing the terminal. The pLD large terminal has 4 digit, 8 buttons and 8 LEDs for alarm and status indications. |
| Part Number |
Description |
| PLD00LF400 |
pCO LED Display Large, green - 4 digit, 8 buttons - panel mount version |
Documentation
| Part Number |
Description |
Type |
Language |
Date |
Release |
| +050003922 |
PLD terminals |
technical leaflet |
ITA/ENG |
9/7/2005 |
1.0 |
| +302238301 |
pCO system: programmable graphic displays |
brochure |
ENG |
10/10/2005 |
1.0 |
| +302238321 |
pCO system: programmable controllers |
brochure |
ENG |
2/15/2006 |
1.0 |
|
|
|
|
