Any UltimateSteam Humidification System consists of 1) a steam control valve & electronic or pneumatic actuator, 2) a humidifier distribution manifold sized for the duct or air handler, 3) steam trap and strainer, 4) the controlling humidistats and/or sensors and 5) any optional equipment required.
The steam humidifier models are designated as follows:
|
|
 |
| Width from 12 to 72 inches |
Width from 18 to 120 inches
Height from 12 to 120 inches |
Width from 36 to 120 inches
Width from 24 to 120 inches |
|
Model Selection |
DS |
B |
H |
F |
00000 |
DS = UltimateSteam |
Type |
Width |
Height |
Version |
|
0=single pipe |
A=12 |
A=12 |
Internal Use Only |
|
B=bottom fed |
B=18 |
B=18 |
|
|
T=top fed |
C=24 |
C=24 |
|
|
|
D=36 |
D=36 |
|
|
|
E=48 |
E=48 |
|
|
|
F=60 |
F=60 |
|
|
|
G=72 |
G=72 |
|
|
|
H=84 |
H=84 |
|
|
|
I=96 |
I=96 |
|
|
|
L=108 |
L=108 |
|
|
|
M=120 |
M=120 |
|
|
Construction: Type 316 Stainless Steel
Insulation: Proprietary high R value pliable coating, plenum safe, non-toxic
Maximum temperature: 500°F (260°C)
Maximum manifold pressure: 1 psi (0.07 Bar)
Control valves:
- Electric: Siemens or other, full pressure drop
- Pneumatic: Siemens or other, full pressure drop
(CAREL uses Siemens valves as standard with maximum 60 psi (4 Bar) inlet pressure)
Steam traps: float & thermostatic standard |
